The category is 'Stepper Motors'
Stepper Motors (1918)
- All Manufacturers
- Step Angle
- Type
- Series
- Frame Size - NEMA
- RoHS
- Factory Pack QuantityFactory Pack Quantity
- Minimum Holding Torque
- Unit Weight
- Coil Type
- Connections
- Diameter - Shaft
- Features
Image | Part Number | Manufacturer | Datasheet | Availability | Pricing(USD) | Quantity | RoHS | Weight | Mounting Hole Spacing | Adjustment range undelayed short-circuit release | Brand | CoilResistance | Connections | Degree of protection (IP) | Device construction | Factory Pack QuantityFactory Pack Quantity | Frame Size - NEMA | Ihs Manufacturer | Manufacturer | Manufacturer Part Number | Mfr | Minimum Holding Torque | Motor Drive Type | Overload release current setting | Package | Part Life Cycle Code | Phase failure sensitive | Pin or Wire Count | Product Status | Range | Rated operating voltage | Rated operation power at AC-3, 230 V | Rated operation power at AC-3, 400 V | Rated permanent current Iu | Rated short-circuit breaking capacity lcu at 400 V, AC | Risk Rank | RoHS | Rohs Code | Shaft Length | Switch off technique | Type of control element | Type of electrical connection of main circuit | Unit Weight | Voltage Rated | With integrated auxiliary switch | With integrated under voltage release | With thermal protection | Operating Temperature | Series | Size / Dimension | Type | Subcategory | Current Rating (Amps) | Supply Voltage | Depth | Reach Compliance Code | Current Rating | Termination Style | Approval Agency | Wire Gauge | Cable Length | Accuracy | Product Type | Coil Type | Circuit Protection Type | Overall Length | Control Voltage | Step Angle | Steps per Revolution | Torque - Holding (oz-in / mNm) | Features | Rotor Inertia | Overall Depth | Product Category | Shaft Diameter | IP Rating | Height | Length | Width | Diameter - Shaft | Length - Shaft and Bearing |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 | Mfr Part No STM23S-3EE | Applied Motion | Datasheet | - | - | Min: 1 Mult: 1 | Applied Motion | 1 | NEMA 23 | Applied Motion | Non-Compliant | 2.624 lbs | Motors & Motor Drives | Stepper Motors | Stepper Motors | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Mfr Part No HW34-696D | Applied Motion | Datasheet | - | - | Min: 1 Mult: 1 | Applied Motion | 1 | Applied Motion | Details | HW34 | Motors & Motor Drives | Stepper Motors | Stepper Motors | IP65 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Mfr Part No STM24Q-3EN | Applied Motion | Datasheet | - | - | Min: 1 Mult: 1 | Applied Motion | 1 | NEMA 24 | Applied Motion | Non-Compliant | 3.483 lbs | Motors & Motor Drives | Stepper Motors | Stepper Motors | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Mfr Part No HT23-600D | Applied Motion | Datasheet | - | - | Min: 1 Mult: 1 | Applied Motion | 1 | NEMA 23 | Applied Motion | Details | Motors & Motor Drives | Stepper Motors | Stepper Motors | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Mfr Part No HW23-601D | Applied Motion | Datasheet | - | - | Min: 1 Mult: 1 | Applied Motion | 1 | Applied Motion | Details | HW23 | Motors & Motor Drives | Stepper Motors | Stepper Motors | IP65 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Mfr Part No HT17-222 | Applied Motion | Datasheet | - | - | Min: 1 Mult: 1 | Applied Motion | 1 | Applied Motion | Details | 4.158800 oz | 0.9 Deg | Motors & Motor Drives | Stepper Motors | Stepper Motors | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Mfr Part No EMMS-ST-57-S-SE-G2 | Festo | Datasheet | - | - | Min: 1 Mult: 1 | - | 1.856 (47.14mm) | 0.15 Ohms | Festo Corporation | Bulk | Active | 20.6mm | 48VDC | -10°C ~ 50°C | EMMS-ST | Square - 2.220 x 2.220 (56.40mm x 56.40mm) | Hybrid | 5 A | 48 V | 102.5mm | 5 A | Connector | cURus | ±5% | Bipolar | 1.8° | 200 | 113.3 / 800 | Round Shaft | 290.00gcm² | 6.35mm | 0.250 (6.35mm) | 0.811 (20.60mm) | |||||||||||||||||||||||||||||||||||||||||||||||
| Mfr Part No ISMD23E2-130A-M12S | IDEC | Datasheet | - | - | Min: 1 Mult: 1 | IDEC | 1 | IDEC | ISMD23E2-130A-M12S | Compliant | Stepper Motor+Drive+Controller | Motors & Motor Drives | 3.4 A | Stepper Motors | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Mfr Part No ISMD23E2-130-M12 | IDEC | Datasheet | - | - | Min: 1 Mult: 1 | IDEC | 1 | IDEC | ISMD23E2-130-M12 | Compliant | Stepper Motor+Drive+Controller | Motors & Motor Drives | 3.4 A | Stepper Motors | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Mfr Part No ISMD23E-240E | IDEC | Datasheet | - | - | Min: 1 Mult: 1 | IDEC | 1 | IDEC | ISMD23E-240E | Compliant | Stepper Motor+Drive+Controller | Motors & Motor Drives | 3.4 A | Stepper Motors | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Mfr Part No EMMS-ST-28-L-SEB | Festo | Datasheet | - | - | Min: 1 Mult: 1 | 20mm | EMMS-ST | 48 V | 96mm | 1.4 A | 1.8° | 5mm | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Mfr Part No TXM24IP-3DG | Applied Motion | Datasheet | - | - | Min: 1 Mult: 1 | Applied Motion | 1 | Applied Motion | Motors & Motor Drives | Stepper Motors | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Mfr Part No ERMO-32-ST-E | Festo | Datasheet | - | - | Min: 1 Mult: 1 | - | 3.346 (85.00mm) | Festo Corporation | Bulk | Active | 24VDC | 0°C ~ 50°C | - | Square - 4.134 x 4.134 (105.00mm x 105.00mm) | Hybrid | 4.2 A | Wire Leads with Connector | - | - | - | 1.8° | 200 | 991.28 / 7000 | Round Shaft | 16.4gcm² | - | 0.472 (12.00mm) | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| Mfr Part No HT34-506DC | Applied Motion | Datasheet | - | - | Min: 1 Mult: 1 | Applied Motion | 1 | NEMA 34 | Applied Motion | Details | NEMA 34 | Motors & Motor Drives | Stepper Motors | Stepper Motors | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Mfr Part No HT23-600 | Applied Motion | Datasheet | - | - | Min: 1 Mult: 1 | Applied Motion | Unipolar, Bipolar | 1 | NEMA 23 | Applied Motion | 187 oz-in, 265 oz-in | 8 | Details | 2.183 lbs | High Torque | Motors & Motor Drives | 2 A | 22 AWG | 18 in | Stepper Motors | 1.8 deg | 6.51E-03 oz-in-sq | Stepper Motors | 75.946 mm | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Mfr Part No STM23Q-3EN | Applied Motion | Datasheet | - | - | Min: 1 Mult: 1 | Applied Motion | 1 | NEMA 23 | Applied Motion | Details | 2.624 lbs | Motors & Motor Drives | Stepper Motors | Stepper Motors | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Mfr Part No HT23-554D-ZAA | Applied Motion | Datasheet | - | - | Min: 1 Mult: 1 | Applied Motion | 1 | Applied Motion | Motors & Motor Drives | Stepper Motors | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Mfr Part No HW23-754D | Applied Motion | Datasheet | - | - | Min: 1 Mult: 1 | Applied Motion | Applied Motion | Details | HW23 | Motors & Motor Drives | Stepper Motors | Stepper Motors | IP65 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Mfr Part No STM23S-2EE | Applied Motion | Datasheet | - | - | Min: 1 Mult: 1 | Applied Motion | 1 | NEMA 23 | Applied Motion | Non-Compliant | 1.874 lbs | Motors & Motor Drives | Stepper Motors | Stepper Motors | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Mfr Part No GV2ME223 | Schneider | Datasheet | - | - | Min: 1 Mult: 1 | 327 - 327 | Schneider Electric | IP20 | Complete device in housing | 1 | SCHNEIDER ELECTRIC SA | Schneider Electric | GV2ME223 | Manual Motor Starter | 20 - 25 | Active | Yes | TeSys | 690 - 690 | 5.5 | 11 | 25 | 15 | 5.53 | Details | Yes | Thermomagnetic | Push button | Spring clamp connection | No | No | Yes | GV2M | Motors & Motor Drives | 78.2 | unknown | 20 → 25 A | Motor Drives | THERMAL MAGNETIC | 89mm | 20 → 25 A | 78.2mm | Motor Drives | 101 | 44.5 |
-
STM23S-3EE
Applied Motion
Package:Stepper Motors
Price: please inquire
-
HW34-696D
Applied Motion
Package:Stepper Motors
Price: please inquire
-
STM24Q-3EN
Applied Motion
Package:Stepper Motors
Price: please inquire
-
HT23-600D
Applied Motion
Package:Stepper Motors
Price: please inquire
-
HW23-601D
Applied Motion
Package:Stepper Motors
Price: please inquire
-
HT17-222
Applied Motion
Package:Stepper Motors
Price: please inquire
-
EMMS-ST-57-S-SE-G2
Festo
Package:Stepper Motors
Price: please inquire
-
ISMD23E2-130A-M12S
IDEC
Package:Stepper Motors
Price: please inquire
-
ISMD23E2-130-M12
IDEC
Package:Stepper Motors
Price: please inquire
-
ISMD23E-240E
IDEC
Package:Stepper Motors
Price: please inquire
-
EMMS-ST-28-L-SEB
Festo
Package:Stepper Motors
Price: please inquire
-
TXM24IP-3DG
Applied Motion
Package:Stepper Motors
Price: please inquire
-
ERMO-32-ST-E
Festo
Package:Stepper Motors
Price: please inquire
-
HT34-506DC
Applied Motion
Package:Stepper Motors
Price: please inquire
-
HT23-600
Applied Motion
Package:Stepper Motors
Price: please inquire
-
STM23Q-3EN
Applied Motion
Package:Stepper Motors
Price: please inquire
-
HT23-554D-ZAA
Applied Motion
Package:Stepper Motors
Price: please inquire
-
HW23-754D
Applied Motion
Package:Stepper Motors
Price: please inquire
-
STM23S-2EE
Applied Motion
Package:Stepper Motors
Price: please inquire
-
GV2ME223
Schneider
Package:Stepper Motors
Price: please inquire