The category is 'PMIC - Power Distribution Switches, Load Drivers'
- All Manufacturers
- Base Part Number
- Built-in Protections
- Driver Number of Bits
- ECCN Code
- Fault Protection
- Features
- Height
- Input Type
- Interface
- JESD-609 Code
- Lead Free
- Length
- Base Part Number:
DRV102
Image | Part Number | Manufacturer | Datasheet | Availability | Pricing(USD) | Quantity | RoHS | Mounting Type | Package / Case | Surface Mount | Number of Pins | Operating Temperature | Packaging | JESD-609 Code | Part Status | Moisture Sensitivity Level (MSL) | Number of Terminations | Termination | ECCN Code | Terminal Finish | Voltage - Rated DC | Terminal Position | Terminal Form | Peak Reflow Temperature (Cel) | Number of Functions | Supply Voltage | Frequency | Base Part Number | Pin Count | Number of Outputs | Output Voltage | Output Type | Max Output Current | Operating Supply Voltage | Supply Voltage-Max (Vsup) | Power Supplies | Supply Voltage-Min (Vsup) | Interface | Operating Supply Current | Nominal Supply Current | Output Configuration | Output Current | Voltage - Supply (Vcc/Vdd) | Propagation Delay | Input Type | Switch Type | Nominal Input Voltage | Ratio - Input:Output | Voltage - Load | Driver Number of Bits | Fault Protection | Output Peak Current Limit-Nom | Built-in Protections | Features | Height | Length | Width | Radiation Hardening | REACH SVHC | RoHS Status | Lead Free |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 | Mfr Part No DRV102F/500 | Texas Instruments | Datasheet | 3 | - | Min: 1 Mult: 1 | Surface Mount | TO-263-8, D2Pak (7 Leads + Tab), TO-263CA | YES | 7 | -55°C~125°C TA | Tape & Reel (TR) | e3 | Obsolete | 3 (168 Hours) | 7 | EAR99 | Matte Tin (Sn) | SINGLE | GULL WING | 260 | 1 | 24V | 29kHz | DRV102 | 7 | 1 | 1.7V | Bipolar | 60V | 24V | 8V | On/Off | 9mA | High Side | 2.7A | Not Required | Non-Inverting | Relay, Solenoid Driver | 1:1 | 8V~60V | 1 | Current Limiting (Fixed), Over Temperature | 2.7A | OVER CURRENT; THERMAL | Internal PWM, Status Flag | 4.44mm | 10.1mm | 8.89mm | No | No SVHC | ROHS3 Compliant | Lead Free | ||||||||
| Mfr Part No DRV102FKTWT | Texas Instruments | Datasheet | 19 | - | Min: 1 Mult: 1 | Surface Mount | TO-263-8, D2Pak (7 Leads + Tab), TO-263CA | YES | 7 | -55°C~125°C TA | Cut Tape (CT) | e3 | Obsolete | 3 (168 Hours) | 7 | SMD/SMT | EAR99 | Matte Tin (Sn) | SINGLE | GULL WING | 245 | 1 | 24V | 24kHz | DRV102 | 7 | 1 | 1.7V | Bipolar | 2A | 24V | 60V | On/Off | 9mA | High Side | 2.7A | Not Required | Non-Inverting | Relay, Solenoid Driver | 24V | 1:1 | 8V~60V | 1 | Current Limiting (Fixed), Over Temperature | 2.7A | OVER CURRENT; THERMAL | Internal PWM, Status Flag | 4.44mm | 10.1mm | 8.89mm | No | No SVHC | ROHS3 Compliant | Lead Free | ||||||
| Mfr Part No DRV102FKTWTG3 | Texas Instruments | Datasheet | - | - | Min: 1 Mult: 1 | Surface Mount | TO-263-8, D2Pak (7 Leads + Tab), TO-263CA | YES | 7 | -55°C~125°C TA | Tape & Reel (TR) | e3 | Obsolete | 3 (168 Hours) | 7 | EAR99 | Matte Tin (Sn) | SINGLE | GULL WING | 245 | 1 | 24V | DRV102 | 7 | 1 | Bipolar | 24V | 60V | On/Off | 9mA | High Side | 2.7A | Not Required | Non-Inverting | Relay, Solenoid Driver | 1:1 | 8V~60V | 1 | Current Limiting (Fixed), Over Temperature | 2.7A | OVER CURRENT; THERMAL | Internal PWM, Status Flag | 4.44mm | 10.1mm | 8.89mm | No | ROHS3 Compliant | Lead Free | ||||||||||||
 | Mfr Part No DRV102T | Texas Instruments | Datasheet | 1 | - | Min: 1 Mult: 1 | Through Hole | TO-220-7 (Formed Leads) | NO | 7 | -55°C~125°C TA | Tube | e3 | Obsolete | 1 (Unlimited) | 7 | EAR99 | Matte Tin (Sn) | 60V | ZIG-ZAG | 1 | 24V | 24kHz | DRV102 | 3 | 1 | 1.7V | Bipolar | 2A | 24V | On/Off | 9mA | High Side | 2.7A | Not Required | 1.8 μs | Non-Inverting | Relay, Solenoid Driver | 24V | 1:1 | 8V~60V | 1 | Current Limiting (Fixed), Over Temperature | 2.7A | OVER CURRENT; THERMAL | Internal PWM, Status Flag | 4.6mm | 10.16mm | No | No SVHC | ROHS3 Compliant | Lead Free | |||||||||
| Mfr Part No DRV102TG3 | Texas Instruments | Datasheet | - | - | Min: 1 Mult: 1 | Through Hole | TO-220-7 (Formed Leads) | NO | 7 | -55°C~125°C TA | Tube | e3 | Obsolete | 1 (Unlimited) | 7 | EAR99 | Matte Tin (Sn) | ZIG-ZAG | 1 | 24V | DRV102 | 3 | 1 | 1.7V | Bipolar | 24V | 60V | On/Off | 9mA | High Side | 2.7A | Not Required | Non-Inverting | Relay, Solenoid Driver | 1:1 | 8V~60V | 1 | Current Limiting (Fixed), Over Temperature | 2.7A | OVER CURRENT; THERMAL | Internal PWM, Status Flag | 4.6mm | 10.16mm | No | ROHS3 Compliant | Lead Free |
-
DRV102F/500
Texas Instruments
Package:PMIC - Power Distribution Switches, Load Drivers
Price: please inquire
-
DRV102FKTWT
Texas Instruments
Package:PMIC - Power Distribution Switches, Load Drivers
Price: please inquire
-
DRV102FKTWTG3
Texas Instruments
Package:PMIC - Power Distribution Switches, Load Drivers
Price: please inquire
-
DRV102T
Texas Instruments
Package:PMIC - Power Distribution Switches, Load Drivers
Price: please inquire
-
DRV102TG3
Texas Instruments
Package:PMIC - Power Distribution Switches, Load Drivers
Price: please inquire